Ligninolytic enzyme production in selected sub-tropical white rot fungi under different culture conditions

2001 ◽  
Vol 41 (2) ◽  
pp. 115-129 ◽  
Author(s):  
Memory Tekere ◽  
Remigio Zvauya ◽  
John S. Read
Author(s):  
Jaspreet Kaur ◽  
Amar Pal Singh ◽  
Ajeet Pal Singh ◽  
Rajinderpal Kaur

The White Fungus, which causes white rot on tree trunks, belongs to the basidiomycetes. Research into the microbiology of White-rot fungi has focused on engineering processes related to factors such as cell growth and enzyme production processes, and to smaller, i.e., molecular biology. Many studies have been conducted to select issues with high or specific biodegradation performance in a variety of ways. Production inhibitors have been used to improve enzyme production. Investigators are investigating different carriers (Stainless Steel net, polyamide fiber net, fiberglass net and polyurethane foam) to impair P.chrysosporium ligninolytic enzyme production. In this review, Pathophysiology, Microbiology, impact factors, treatments and alternative uses show white mold formation in biotransformation. The white fungus is being investigated to produce biotechnology for the reduction of a broad spectrum, a natural pollutant based on lignin-deficient enzymes. This in particular covers the destruction of many wastes and environmental pollution, including wastewater, pesticides, toxic natural pollutants, chlorinated hydrocarbons, etc. It will be updated.


2013 ◽  
Vol 2013 ◽  
pp. 1-4 ◽  
Author(s):  
M. P. Singh ◽  
S. K. Vishwakarma ◽  
A. K. Srivastava

In the present investigation, four species of white rot fungi (Pleurotus), that is,P. flabellatus, P. florida, P. ostreatusandP. sajor-cajuwere used for decolorization of direct blue 14 (DB14). Among all four species ofPleurotus,P. flabellatusshowed the fastest decolorization in petri plates on different concentration, that is, 200 mg/L, 400 mg/L, and 600 mg/L. All these four species were also evaluated for extracellular ligninolytic enzymes (laccase and manganese peroxidase) production and it was observed that the twelve days old culture ofP. flabellatusshowed the maximum enzymatic activity, that is, 915.7 U/mL and 769.2 U/mL of laccase and manganese peroxidase, respectively. Other threePleurotusspecies took more time for dye decolorization and exhibited less enzymatic activities. The rate of decolorization of DB14 dye solution (20 mg/L) by crude enzymes isolated fromP. flabellatuswas very fast, and it was observed that up to 90.39% dye solution was decolorized in 6 hrs of incubation.


Author(s):  
Nikki Agrawal ◽  
Preeti Verma ◽  
Ravi Shankar Singh ◽  
Sushil Kumar Shahi

3 Biotech ◽  
2017 ◽  
Vol 7 (5) ◽  
Author(s):  
Rosa María Damián-Robles ◽  
Agustín Jaime Castro-Montoya ◽  
Jaime Saucedo-Luna ◽  
Ma. Soledad Vázquez-Garcidueñas ◽  
Marina Arredondo-Santoyo ◽  
...  

BioResources ◽  
2020 ◽  
Vol 15 (4) ◽  
pp. 9166-9179
Author(s):  
Qi An ◽  
Jie Qiao ◽  
Lu-Sen Bian ◽  
Mei-Ling Han ◽  
Xun-You Yan ◽  
...  

Different Pleurotus ostreatus and Flammulina velutipes species were compared relative to their ability to produce laccase in submerged fermentation of various lignocellulosic wastes. Fungi cultivation in identical culture conditions revealed wide differences among both species and strains of the same species. The laccase secretion ability of P. ostreatus strains was superior to F. velutipes strains. Maximum laccase production on cottonseed hull, corncob, and poplar wood was secreted by P. ostreatus CY 568, P. ostreatus CCEF 89, and P. ostreatus CY 568, respectively. The nature of lignocellulosic materials played an important role in determining the expression of laccase potential of fungi. The presence of cottonseed hull improved laccase activity and accelerated the rate of enzyme production. Maximum laccase production on cottonseed hull was nearly 1.29-fold and 1.53-fold higher than that on corncob and poplar wood, respectively. Laccase activity was detected in almost all tested strains on cottonseed hull on the first day, while only a few strains on poplar wood and corncob were detected on the first day. These findings will be helpful for selecting the appropriate strain in industrial applications and for optimization of integrated industrial laccase production.


2021 ◽  
Vol 9 (12) ◽  
pp. 2595
Author(s):  
Yu Zhang ◽  
Zhongqi Dong ◽  
Yuan Luo ◽  
En Yang ◽  
Huini Xu ◽  
...  

Manganese peroxidases (MnPs), gene family members of white-rot fungi, are necessary extracellular enzymes that degrade lignocellulose and xenobiotic aromatic pollutants. However, very little is known about the diversity and expression patterns of the MnP gene family in white-rot fungi, especially in contrast to laccases. Here, the gene and protein sequences of eight unique MnP genes of T. trogii S0301 were characterized. Based on the characteristics of gene sequence, all TtMnPs here belong to short-type hybrid MnP (type I) with an average protein length of 363 amino acids, 5–6 introns, and the presence of conserved cysteine residues. Furthermore, analysis of MnP activity showed that metal ions (Mn2+ and Cu2+) and static liquid culture significantly influenced MnP activity. A maximum MnP activity (>14.0 U/mL) toward 2,6-DMP was observed in static liquid culture after the addition of Mn2+ (1 mM) or Cu2+ (0.2 or 2 mM). Moreover, qPCR analysis showed that Mn2+ obviously upregulated the Group I MnP subfamily (T_trogii_09901, 09904, 09903, and 09906), while Cu2+ and H2O2, along with changing temperatures, mainly induced the Group II MnP subfamily (T_trogii_11984, 11971, 11985, and 11983), suggesting diverse functions of fungal MnPs in growth and development, stress response, etc. Our studies here systematically analyzed the gene structure, expression, and regulation of the TtMnP gene family in T. trogii, one of the important lignocellulose-degrading fungi, and these results extended our understanding of the diversity of the MnP gene family and helped to improve MnP production and appilications of Trametes strains and other white-rot fungi.


2016 ◽  
Vol 23 (1) ◽  
pp. 1-12
Author(s):  
Shardesh Chaurasia ◽  
Prakashchandra Mervana ◽  
Satyapal Singh ◽  
Sanjay Naithani

Biopulping has the potential to improve pulp quality, paper properties and to reduce energy costs and environmental impact relative to traditional pulping approaches. The technology has focused on the white rot fungi that are known to be degrader of wood constituents. This group of fungi have complex extracellular ligninolytic enzyme systems that can selectively degrade/ alter lignin structure and allow cellulose fibres to be relatively unaffected. It colonizes either on living or dead wood and decomposes almost all plant cell wall polymers including lignin and extractives making it to be extremely potential to be used in biopulping. Biopulping reduces the chemical load in paper industry and thus partially limiting environmental threats caused by conventional pulping. It has been advised that energy savings alone could make the process economically viable. Other benefits include improved burst strength and tear indices of product and reduced pitch deposition.


Sign in / Sign up

Export Citation Format

Share Document